Sensaphone®Model 1104 User’s Manual
92
Local, On-site
Acknowledgment
Touch-Tone
Acknowledgment:
Fast Code 555
Touch-Tone
Acknowledgment:
Normal Code 555
Tone or Pulse
Callback
Acknowledgment:
Within Intercall
Time
IV.The Alarm Is Acknowledged Variable Factors
•At any time after a valid alarm is
determined, the alarm may be
acknowledged at the Model 1104’s
installation site, by pressing any key.
•When the Model 1104 dials out and the
call is answered via Touch-Tone
telephone, any alarm may be instantly
acknowledged by pressing “555.”
•If the alarm message repeats for the
number of programmed Voice
Repetitions, and “555” has not been
entered, the Model 1104 will say:
“Indicate that you have received warning
message.”
The Model 1104 waits 10 seconds for the
Touch-Tone code “555” to be entered. If
the code is entered within 10 seconds, it
responds:
"Warning message received by telephone
number...(the dialed phone number)."
The alarm is considered acknowledged
and the dialout concludes.
•If the Model 1104 does not receive the
Touch-Tone code within 10 seconds, it
recites the following and then hangs up:
“Dial telephone number (gives the Unit ID
Number) within...(the programmed Intercall
Time.)”
The recipient of this message must call
the Model 1104 back within the period
programmed for Intercall Time, in order
to acknowledge the alarm. If Local
Voice Mute is off, the unit will beep at
the installation site while waiting for this
call.
• Callback: The Model 1104 waits 10 rings
before answering to guard against
random acknowledgment. If an