Chapter 4: Communications Programming
This chapter explains the keypad commands for communications
programming of the Model 1104, including interrogation and
resetting of the following:
• The Unit ID Number
• Dial-out Telephone Numbers
• Tone or Pulse Dialing
• Special Dialing with Pagers, Beepers and Access Numbers.
• Rings Until Answer and Telephone Answering Device
Compatibility
• Listen-in Time
• Call Delay
• Local Voice Mute
• Voice Repetitions
• Intercall Time
• Maximum Number of Calls
• The Clock
• Security Code

4.1 The Unit ID Number

The Unit ID Number is the identification number of the Model
1104. This number may be the same as the telephone number
where the unit is installed, or it may be designated using any
number that best suits your application.
The purpose of the Unit ID Number is to immediately provide the
source of any alarm, especially when using multiple Model 1104
units in a complex monitoring system. When the Model 1104 is
called from a remote location, it always begins its message with
the identification number:
“Hello, this is telephone number (Unit ID Number).”

4.1.1 Programming the ID Number

To program the ID Number:
1. Press SET.
SET
#
33