Sensaphone® Model 1104 User’s Manual
Depending upon the remaining voltage, it may respond:
•“Battery Condition OK,” if over 8.2 Volts.
•“Battery Condition low,” if between 7.2 and 8.2 Volts.
•“Replace batteries,” if below 7.2 Volts.
6.2.5Remote Access by Touch-Tone™ Telephone
Calling the Model 1104 for a Status Report provides the opportunity to access other functions, using
•Disabling/enabling any input.
•Disabling/enabling High Sound Alarm monitoring.
•Disabling/enabling AC Power monitoring.
•Activation of
•Activation of the Status Report.
To issue commands by telephone, first dial the number of the Model 1104 to access the Status Report. The Status Report will be followed by the programmed
accessed by pressing any push button on the telephone.
If a Security Code is in effect, the Model 1104 will prompt you with: “Enter Security Code.” If no Security Code is set, then it will say “O.K.”
•Enter your Security Code (4 digits) with the telephone push buttons. If the code you enter is correct, the Model 1104 will respond: “OK.”
•If you enter the wrong Security Code, the Model 1104 says, “Error. Have a good day,” and hangs up.
Disabling/enabling inputs – If an input is set to detect an alert condition, it can be disabled to prevent the Model 1104 from dialing out, or
This feature allows the convenience of disabling an input, even if you are away from the site of the Model 1104. One such application may involve an input programmed to detect unauthorized entry. You are in another locale, but must allow someone else temporary access to the area monitored by the Model 1104. Using a
86
