4.11 Intercall Time
The Intercall Time is the programmable period of time the Model
1104 waits in calling subsequent telephone numbers. Intercall
Time is activated only after alarm dial-out to the first telephone
number fails to be acknowledged. This period can be
programmed from 10 seconds to 60 minutes. The default intercall
time is 1 minute.
If an incoming telephone call is made to the Model 1104 during
Intercall Time (in between its dialing of subsequent telephone
numbers to report an alarm), it will answer the incoming call and
immediately report any existing alarms. The manner in which the
incoming call is answered depends upon whether or not TAD is
enabled or disabled:
•If TAD (Telephone Answering Device) is enabled, Rings
Until Answer will be 1.
•If TAD is disabled, Rings Until Answer will be 10.
Refer to Section 4.5, Rings Until Answer; and Section 4.6, TAD
(Telephone Answering Device).

4.11.1 Programming Intercall Time

To program Intercall Time:
1. Press SET.
2. Press INTERCALL TIME.
The Model 1104 will respond:“Enter minutes.”
3. Using the number keys, enter the minutes.
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
3
INTERCALL
TIME
SET
#
Sensaphone®Model 1104 User’s Manual
54