4.4.4 Special Dialing to a Beeper or Pager
The following example demonstrates just one solution to
programming the Model 1104 for dialing to a beeper or pager.
Many other key sequences will also work. Start with steps 1–3
below; next, enter special dialing keys where required for your
beeper or pager service.
To incorporate a pound or asterisk:
1. Press SET.
2. Press PHONE NUMBER.
3. Press any unassigned number key (from 1 to 4) to represent
the new telephone number entry.
4. Enter the complete telephone number using the number keys.
The Model 1104 will recite the digits as they are pressed.
5. Press CODE. This instructs the Model 1104 to wait for the
telephone call to be answered by the beeper or pager service.
(A voice message will not occur—only digital tones are used.)
Note that CODE may not work with beepers where there is no
ring before the beeper connects. If that proves to be the case
for your particular beeper, skip the CODE step and proceed
from Step 4 to Step 6.
CODE
MUTE
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
PHONE
NUMBER
SET
#
Sensaphone®Model 1104 User’s Manual
42