4.3 Tone or Pulse Dialing
The Model 1104 can dial out in pulse or Touch Tone™. Select the
type of dialing, in either pulse or tone, depending upon the type of
service provided by your telephone company. The default is tone.
To program for either pulse or tone:
1. Press the SENSOR ON/OFF key.
2. Press TONE.
The Model 1104 will respond:“Off” to indicate that tone dialing
is off and pulse is enabled, or“On” to indicate that tone dialing is
on and pulse is disabled.
3. Repeat key sequence to switch between settings.
4.4 Special Dialing
The Model 1104 has provisions for special dialing sequences.
Special dialing sequences allow:
• Dialing that requires an access number to connect with an
outside line.
• Dialing that requires the pound (#) or asterisk (*).
• Dialing to a beeper or pager.

4.4.1 Special Dialing Keys

The following designated keys represent special functions when
used with PHONE NUMBER entries:
1. Pause
PAUSE represents a four-37 second pause in dialing. It can be
used when an access number is required before dialing to an
outside line. (For example, in some cases a “9” or other number,
must be dialed first, in order to get a dial tone for an outside line.)
RING/TAD
PAUSE
AM
ENTER
TONE
PM
ENTER
TONE
PM
SENSOR
ON/OFF
Sensaphone®Model 1104 User’s Manual
38