What the marks on DVDsindicate
Themarks below may be found on DVD disc
labelsand packages. They indicate the type of
imagesand audio recorded on the disc, and
thefunctions you can use.
Mark Meaning
2Indicatesthe number of audio sys-
tems.
2Indicatesthe number of subtitle lan-
guages.
3Indicatesthe number of viewing an-
gles.
16 : 9 LB Indicatesthe picture size (aspect ratio:
screenwidth-to-height ratio) type.
3
4
ALL
Indicatesthe number of the region
whereplayback is possible.

When an operation is prohibited

Whenyou are watching a DVD and attempt to
performan operation, it may not be per formed
becauseof the programming on the disc.
Whenthis happens, the icon appears on
thescreen.
!Theicon may not appear with certain
discs.
Resetting the microprocessor
PressingRESET lets you reset the micropro-
cessorto its initial settings.
Themicroprocessor must be reset under the
followingconditions:
!Priorto using this unit for the first time
afterinstallation
!Ifthe unit fails to operate properly
!Whenstrange or incorrect messages ap-
pearon the display
1 Turnthe ignition switch OFF.
2 PressRESET with a pen tip or other
pointedinstrument.
RESETbutton
Note
Aftercompleting connections or when you want
toerase all memorized settings or return the unit
toits initial (factory) settings, switch your engine
ONor set the ignition switch to ACC ON before
pressingRESET.
Use and care of the remotecontrol

Installing the battery

Slidethe tray out on the back of the remote
controland insert the battery with the plus (+)
andminus () poles pointing in the proper di-
rection.
!Whenusing for the first time, pull out the
filmprotruding from the tray.
Before YouStart
En
10
Section
02