+66is displayed as the level is increased
ordecreased.
5 Touch andthen touch or to se-
lectthe desired frequency.
Touch or untilthe desired frequency ap-
pearsin the display.
Low:40Hz80Hz100Hz160Hz
Mid:200Hz500Hz1kHz2kHz
High:3.15kHz8kHz10kHz12.5kHz
6 Touch andthen touch or to se-
lectthe desired Q factor.
Touch or untilthe desired Q factor ap-
pearsin the display.
2W1W1N2N
Note
Ifyou make adjustments, CUSTOM curve is up-
dated.
Adjusting bass and treble
Youcan adjust bass and treble settings.
!IfEQ-EX function has been selected and
onlywhen EQ-EX is turned on and
CUSTOMis selected as the equalizer
curve,you can adjust bassand treble set-
tings.(Refer to Compensating for equalizer
curves (EQ-EX) on page 63.)

Adjusting bass

Youcan adjust the cut-off frequency and the
basslevel.
!IfSFEQ has been set to FRONT1, bass ad-
justmentaffects only the rear output: front
outputcannot be adjusted. (Refer to Setting
thesound focus equalizer (SFEQ) on page
64.)
1 TouchA.MENU and AUDIO and then
touchBASS.
2 Touch or to select the desired fre-
quency.
Touch or untilthe desired frequency ap-
pearsin the display.
40Hz63Hz100Hz160Hz
3 Touch or to adjust the bass level.
Eachtime you touch or increases or de-
creasesthe bass level. +6 6is displayed as
thelevel is increased or decreased.

Adjusting treble

Youcan adjust the cut-off frequency and the
treblelevel.
!IfSFEQ has been set to FRONT1 or
FRONT2,treble adjustment affects only the
frontoutput: rear output cannot be ad-
justed.(Refer to Setting the sound focus
equalizer(SFEQ) on page 64.)
1 TouchA.MENU and AUDIO and then
touchTREBLE.
2 Touch or to select the desired fre-
quency.
Touch or untilthe desired frequency ap-
pearsin the display.
2.5kHz4kHz6.3kHz10kHz
3 Touch or to adjust the treble
level.
Eachtime you touch or increases or de-
creasesthe treble level. +6 6is displayed as
thelevel is increased or decreased.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
Audio Adjustments
En 61
Section
13
AudioAdjustments