Pioneer AVH-P6650DVD Adjusting 3-band parametric equalizer

!CUSTOM1and CUSTOM2 are adjusted
equalizercurves.
!WhenFLAT is selected no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternativelybetween
FLATand a set equalizer curve.
1 PressEQ and hold to switch to equali-
zerfunction.
PressEQ and hold until an equalizer curve
nameappears in the display.
#Toswitch to SFC function, press EQ and hold
again.
2 PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
SUPERBASSPOWERFULNATURAL
VOCALFLATCUSTOM1CUSTOM2
Adjusting 3-band parametric
equalizer
For CUSTOM1and CUSTOM2 equalizer
curves,you can adjust thefront, rear and cen-
terequalizer curves separatelyby selecting a
centerfrequency, an equalizer level and a Q
factorfor each band.
!Aseparate CUSTOM1 curve can be cre-
atedfor each source.
!ACUSTOM2curve canbe created com-
monto all sources.
!Thecenter speaker largely determines the
soundimage and getting the balance right
isnteasy. We recommend reproducing a 2-
ch.audio (a CD for example) and getting
thebalance right among the speakers ex-
ceptfor the center, and then reproducing a
5.1-ch.audio (Dolby Digital or DTS) and ad-
justingthe center speaker output to the
balanceyou have already got among the
otherspeakers.
1 TouchA.MENU and DSP and then touch
NEXTtwice.
2 TouchPARAMETRIC EQ.
3 Touch or to select the desired
item.
Eachtime you touch or selects the item
inthe following order:
SP-SEL(speakers)BAND (bands)
FREQUENCY(center frequency)LEVEL
(equalizerlevel)Q. FACTOR (Q factor)
4 Touch or to select the speaker to
beadjusted.
Touch or untilthe desired speaker ap-
pearsin the display.
REAR(rear speakers)CENTER (center speak-
er)FRONT(front speakers)
#Youcannot select speakers whose size is set
atOFF.
5 Touch andthen touch or to se-
lectthe equalizer band to be adjusted.
Eachtime you touch or selects equalizer
bandsin the following order:
LOW(low)MID (mid)HIGH (high)
6 Touch andthen touch or to se-
lectthe center frequency of selected band.
Touch or untilthe desired frequency ap-
pearsin the display.
40Hz50Hz63Hz80Hz100Hz125Hz
160Hz200Hz250Hz315Hz400Hz
500Hz630Hz800Hz1kHz1.25kHz
1.6kHz2kHz2.5kHz3.15kHz4kHz
5kHz6.3kHz8kHz10kHz12.5kHz
7 Touch andthen touch or to ad-
justthe equalizer level.
Eachtime you touch or increases or de-
creasesthe equalizer level. +06 06 is dis-
playedas the level is increased or decreased.
Digital Signal Processor
En 73
Section
14
DigitalSignal Processor