4 Touchany of 18 to select the desired
level.
Theparental lock level is set.
!LEVEL8 Playback of the entire disc is pos-
sible(initial setting)
!LEVEL7LEVEL 2 Playback of discs for
childrenand non-adult-oriented discs is
possible
!LEVEL1 Playback of discs for children
onlyis possible
Notes
!Werecommend to keep a record of your code
numberin case you forget it.
!Theparental lock level is recorded on the disc.
Youcan confirm it by looking at the disc pack-
age,included literature or on the disc itself.
Withdiscs that do not feature a recorded par-
entallock level, you cannot use parental lock.
!Withsome discs, parental lock operates to
skipcertain scenes only, after which normal
playbackresumes. For details, refer to the
discsinstructions.

Changing the level

Youcan change the set parental lock level.
1 TouchSETUP and VISUAL and then
touchPARENTAL.
2 Touch09 to input the registered code
number.
3 TouchENTER.
Thisenters the code number, and you can now
changethe level.
#Ifyou input an incorrect code number, the
icon isdisplayed. Touch Cand input the cor-
rectcode number.
#Ifyou forget your code number, refer to If you
forgetyour code number on this page.
4 Touchany of 18 to select the desired
level.
Thenew parental lock level is set.

If you forget your code number

Referto Changing the level on this page, and
touchC10 times. The registered code number
iscanceled, letting you register a new one.
Automatic playback of DVDs
Whena DVDs disc with DVD menu is inserted,
thisunit will cancel the DVD menu automati-
callyand start playback from the first chapter
ofthe first title.
!SomeDVDs may not operate properly. If
thisfunction is not fully operated, turn this
functionoff and start playback.
1 TouchSETUP and OTHERS and then
touchDVD AUTO PLAY.
2 Touchato turn automatic playback on.
#Toturn automatic playback off, touch b.
#Whenthe automatic playback is on, you can-
notoperate repeating play of DVD disc (refer to
Repeatingplay on page 29).
Setting remote controlcode type
Whenthe remote control operation switch is
setto DVD, changing the remote control code
typeenables you to operate the Pioneer DVD
playerwith the supplied remote contro l. There
arethree remote codes, code type A, code
typeBand code type AVH. When operating a
multi-DVDplayer (e.g. XDV-P9II), select code
A.When operating a DVD navigation unit, se-
Setting up the DVD player
En
80
Section
15