![](/images/new-backgrounds/1091740/91740125x1.webp)
Troubleshooting
Problem | Easy Solution | ||
|
|
| |
EO is displayed on | a. | Check that lid is closed properly. | |
LED Screen | b. Check that the Pressure Release Valve is in the | ||
| |||
|
| correct position. | |
| c. | Make sure the silicone rubber gasket is attached | |
|
| properly to the gasket holder and is securely in place | |
|
| on the lid. | |
|
|
| |
E1 is displayed on | • | Unplug unit and allow to sit for 20 minutes. If no | |
LED Screen |
| change, Please call Breville Consumer Service. | |
|
|
| |
E2 is displayed on | • | Ensure the cooking bowl is properly positioned | |
LED Screen |
| inside base. The cooking bowl must be in direct | |
|
| contact with the heating plate. Make sure there are | |
|
| no unwanted materials on the heating plate. | |
|
|
| |
E3 is displayed on | • | Ensure the lid is off the appliance or placed on top | |
LED Screen |
| to rest in an offset position when you are using the | |
|
| SAUTÉ/SEAR setting. | |
|
|
| |
The appliance automatically | • | Add more water to cooking bowl and restart the | |
switches to Keep Warm |
| cooking cycle. | |
without going through a |
|
| |
complete cooking cycle |
|
| |
|
|
| |
Air is escaping from the rim | a. | Install sealing gasket correctly. | |
of the lid | b. Clean sealing gasket. | ||
| |||
| c. | Replace sealing gasket. | |
| d. | Lock lid again. | |
|
|
| |
Steam is released from the | a. | Clean sealing gasket. | |
pressure indicator valve | b. Replace sealing gasket. | ||
during cooking | |||
c. | Change silicone rubber gasket every | ||
| |||
|
|
| |
The pressure indicator rod | a. | Place Pressure release valve in the correct position. | |
does not rise in PRESSURE | b. Place more food and water in the cooking bowl. | ||
COOK setting | |||
c. | Call Breville Consumer Service. | ||
| |||
|
|
| |
Lid is hard to open or cannot | a. | Check if the pressure indicator locking pin is in the | |
be opened |
| upright position. If it isn't, push down with aid of a | |
|
| pencil or like item, jiggle the lid and disengage. This | |
|
| will allow the air to escape and the lid should open. | |
|
|
| |
|
| 63 |
BPR600XL_IB_B13.indd 63 | 18/01/13 1:03 PM |