Introduction of DSP
adjustments
Important
Followingfunctions are effective only when you
connecteda Pioneer multi-channel processor
(DEQ-P7650)to this unit.
Bycarrying out thefollowing settings/adjust-
mentsin the order shown, you can create a fi-
nely-tunedsound field effortlessly.
1Settingthe speaker setting
2Usingthe position selector
3AutoTA and EQ (auto-time alignment and auto-
equalizing)
4Adjustingthe time alignment
5Adjustingthe speaker output levels using a
testtone
6Selectinga cross-over frequency
7Adjustingthe speaker output levels
8Adjusting3-band parametric equalizer

Operating the DSP menu

1
2
2
2
1DSPdisplay
Showsthe DSP status.
2Subwooferindicator
Showswhen the subwoofer output is turned
on.
%PressA to display the DSP function
names.
PressArepeatedly to switch between the fol-
lowingDSP functions:
POSI(position selector)FAD (balance ad-
justment)SLA(source level adjustment)
DRC(dynamic range control)DIRCT (di-
rect)Lo/Ro(down mix)
#Whenselecting the FM tuner as the source,
youcannot switch to SLA,DRC.
#Whenplaying other than the DVD disc, you
cannotswitch to DRC.
#Toreturn to the display of each source, press
BAND.
Note
Ifyou do not operate the DSP function within
about30 seconds, the display is automatically re-
turnedto the source display.
Digital Signal Processor
En 63
Section
12
DigitalSignal Processor