1 PressA and hold until frequency and
theQ factor (e.g., F- 80:Q1W) appears in
thedisplay.
2 PressA to select B.
PressAuntil Bappears in the display.
3 Pressmor nto select the desired
frequency.
Pressmor nuntil the desired frequency
appearsin the display.
4063100160(Hz)

Selecting treblefrequency

Youcan select the treble frequency for level
adjustment.
1 PressA and hold until frequency and
theQ factor (e.g., F- 80:Q1W) appears in
thedisplay.
2 PressA to select T.
PressAuntil Tappears in the display.
3 Pressmor nto select the desired
frequency.
Pressmor nuntil the desired frequency
appearsin the display.
2.5k4k6k10k(Hz)
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressA to select LOUD.
PressAuntil LOUD appears in the display.
2 Pressrto turn loudness on.
Loudnesslevel (e.g., LOUD :MID) appears in
thedisplay.
3 Pressmor nto select a desired
level.
Eachpress of mor nselects level in the
followingorder:
LOW(low)MID (mid)HI (high)
4 Pressqto turn loudness off.
LOUD:OFF appears in the display.
Using subwoofer output
Thisunit is equipped with a subwoofer output
whichcan be turned on or off.
1 PressA to select SUB, W.
PressAuntil SUB, W appears in the display.
#Whenthe subwoofer controller setting is
P/O :FUL,you cannot select SUB, W.
2 Pressrto turn subwoofer output on.
SUB,W:NOR appears in the display. Subwoo-
feroutput is now on.
#Ifthe subwoofer output phase has been set to
thereverse, SUB, W:REV will be displayed.
#Toturn subwoofer output off, press q.
3 Pressmor nto select the phase of
subwooferoutput.
Pressmto select reverse phase and REV ap-
pearsin the display. Press nto select nor-
malphase and NOR appears in the display.

Adjusting subwoofer settings

Whenthe subwoofer output is on,you can ad-
justthe cut-off frequency and the output level
ofthe subwoofer.
1 PressA to select 80: 0.
PressAuntil 80: 0 appears in the display.
#Whenthe subwoofer output is on, you can se-
lect80: 0.
Audio Adjustments
En
60
Section
11