Fine-adjusting equalizer curve

Youcan adjust the center frequency and the Q
factor(curve characteristics) ofeach currently
selectedcurve band (EQ-L/EQ-M/EQ-H).
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
1 PressA and hold until frequency and
theQ factor (e.g., F- 80:Q1W) appears in
thedisplay.
2 PressA to select the band for adjust-
mentfrom among low, mid and high.
PressArepeatedly to switch between the fol-
lowingfunctions:
LowMidHighB(bassadjustment)T
(trebleadjustment)
#IfEQ-EX function has been selected and only
whenEQ-EX is turned on and CUSTOM is se-
lectedas the equalizer curve, you can switch to B
andT.
3 Pressmor nto select the desired
frequency.
Pressmor nuntil the desired frequency
appearsin the display.
Low:4080100160 (Hz)
Mid:2005001k2k (Hz)
High:3k8k10k12k (Hz)
4 Pressror qto select the desired Q
factor.
Pressror quntil the desired Q factor ap-
pearsin the display.
2N1N1W2W
Note
Ifyou make adjustments, CUSTOM curve is up-
dated.
Adjusting bass and treble
Youcan adjust bass and treble settings.
!IfEQ-EX function has been selected and
EQ-EXturned on and CUSTOM selected as
theequalizer curve, you canadjust bass
andtreble settings.
!IfSFEQ has been set to FRT1, bass adjust-
mentaffects only the rear output: front out-
putcannot be adjusted.
!IfSFEQ has been set to FRT1 or FRT2, tre-
bleadjustment affects only the front out-
put:rear output cannot be adjusted.

Adjusting bass and treble level

Youcan adjust the bass and treble level.
1 PressA to select B.
PressAuntil Bappears in the display.
#Ifthe treble level has been previously ad-
justed,Twill be displayed.
2 Pressmor nto select bass or treble.
Pressmand Bis displayed. Press nand T
isdisplayed.
3 Pressror qto adjust the level.
Eachpress of ror qincreases or de-
creasesthe selected bass or treble level. +6
6isdisplayed as the level is increased or de-
creased.

Selecting bass frequency

Youcan select the bass frequency for level ad-
justment.
Audio Adjustments
En 59
Section
11
AudioAdjustments