D A I L Y O P E R A T I O N
Aligning Print
When a new form is loaded into the printer for the first time, it may be necessary to adjust where printing begins. This depends upon how the software that controls the printing was written. If the software was written to perform its own character and line spacing relative to the edges of the form, then adjustment may not be necessary. If the print position needs to be adjusted, the following discussion will describe how this is accomplished. Note that the alignment for the selected form is permanently stored in the printer’s memory and does not have to be readjusted each time the form is loaded.
To align print on a particular form, select that form with the FORM SELECT button and then press either of the ALIGN buttons. If the form selected were named “Invoices”, the display would now show the following.
Aligning Print
On INVOICES
After a short time, the display would change to show that you can now MOVE PRINT left or right. Be sure to remember that you are moving where the print is placed on the page.
MOVE
Left/Right
←0.00”→
The VALUE buttons will move the print left or right in 1/100th inch increments. Note that the left and right arrows will change according to which way the print has been moved from the normal print position. The maximum distance print may be moved is 9.99 inches in either direction.
To move the print vertically on the page, press either of the ALIGN buttons and the display will change to the following.
36
