Printek 4000se manual Cut Adjustment, Lines/Inch, Form Length 66 Lines, Top Margin 0 Lines

P R I N T E R C O N F I G U R A T I O N

Cut Adjustment

Cut Adjustment 0

Possible Values: Auto, -0.2951” … 0* … +0.2951”, Auto

This item may be used to adjust the position of the cut relative to the top-of- form for improved cut accuracy. This item is only available when the optional FormsCutter is installed. Refer to the FormsCutter manual for more information.

Lines Per Inch

Possible Values: 6*, 8

Lines/Inch

6

This item sets the line pitch to 6 or 8 Lines Per Inch (LPI).

Form Length

Possible Values: 1 … 66* … 227 Lines

Form Length 66 Lines

This item sets the form length in lines at the current line pitch (LPI). For example: for an eleven-inch form, enter 66 if you are using six lines per inch or 88 if you are using eight lines per inch.

Top Margin

Possible Values: 0* … 226 Lines

Top Margin 0 Lines

This item sets the top margin in lines. Setting a top margin will reduce the size of the printable area of the page by the number of lines set. Printing will not be allowed above the top margin.

Note:In most cases changing where printing begins on a form should be accomplished with ALIGN PRINT rather than with a top margin. Adding a top margin may cause some programs to

48