D A I L Y O P E R A T I O N

Too Much Paper to Unload

This error occurs when the UNLOAD button has been pressed and there is paper present too far beyond the tear bar. This error serves as a warning that you may be placing forms that have already been printed on back into the printer. Tear off any printed forms past the tear bar and press UNLOAD again. This error also occurs if the LOAD button has been pressed and the current form cannot be unloaded.

Selected Form is not Loaded

This error occurs when ONLINE has been pressed and the currently selected form is displaying Not Loaded. Either press LOAD to load the selected form or select a different form and then press ONLINE.

No Ribbon or Wrong Ribbon

This error occurs when the printer is attempting to go on line and cannot detect the presence of a ribbon cartridge. This may be due to the ribbon not actually being present in the printer, or the ribbon may not be installed properly.

This error may also occur when attempting to use a non-Printek brand ribbon. Before attempting to use a ribbon brand other than Printek, please read “Why Use Only Printek® Brand Ribbons” on page 10. Then if you do decide to use non-Printek brand ribbons, refer to “Ribbon Checking” on page 67.

Ribbon Lid Open

This error occurs when ONLINE has been pressed and the ribbon lid has been left open. Close the lid and press ONLINE again.

Change Ribbon

This message is periodically displayed when a ribbon has reached the end of its useful life and indicates that a new Printek ribbon should be installed. This error is merely a reminder to change the ribbon and does not force the printer off line.

40

Page 48
Image 48
Printek 4000se manual Too Much Paper to Unload, Selected Form is not Loaded, No Ribbon or Wrong Ribbon, Ribbon Lid Open