P R I N T E R C O N F I G U R A T I O N
Characters
Possible Values: Control*, Printable
Characters Control
This item selects whether certain control character symbols will be printed or be treated as control characters. The effect of this is dependent upon the Emulation selected.
Minimum Buffer
Possible Values: No*, Yes
Minimum Buffer No
This item selects whether the smallest possible I/O buffer should be used. Setting this item to No will allow the printer to make maximum use of the I/O buffer (see “Paper Out Fault” on page 64 for more information on buffer size). Setting this to Yes may decrease performance, but is useful when the printer is currently printing using the printer with operating systems that try to keep track of which page. This may also be useful when using serial I/O with systems that do not respond quickly enough to handshake signals.
Baud Rate
Baud Rate 9600
Possible Values: 110, 150, 300, 600, 1200, 2400, 4800, 9600*
This item selects the baud rate for the serial interface. This must be set to match the baud rate setting on the host computer.
Data Bits
Data Bits 8
Possible Values: 8*, 7
This item selects the number of data bits in the serial character frame. This must be set to match the character size setting on the host computer.
56
