Printek 4000se manual Truncate Lines No, Ribbon Check On

P R I N T E R C O N F I G U R A T I O N

This item selects how much of the 32K byte input buffer is set aside for reprinting a page when Finish Page or Reprint Page has been selected for the Paper Out Fault Action item (see above). The value selected (0 to 28K bytes in 1K byte increments) should be set to accommodate the largest page expected, but not unnecessarily large since the larger this is set, the smaller the effective I/O buffer. The 8K-byte default setting should be large enough to hold most pages of text, but may not be large enough to hold more complex or graphic filled pages. If the page size selected is not large enough, the page will be broken as described under Paper Out Fault Action item above.

If the Paper Out Fault Action item is set to Break Page, the Reprint Page Size may be set to 0 to allow the largest possible I/O buffer.

Truncate Long Lines

Possible Values: Yes, No*

Truncate Lines No

When this item is set to Yes, long text lines that would wrap around the next line will be terminated at the right margin column or the right usable edge of the platen, whichever is reached first. The remainder of the characters in the line is discarded. Graphics printing always truncates.

Ribbon Checking

Possible Values: On*, Off

Ribbon Check On

This item selects whether or not ribbon checking is active. This feature works exclusively with Printek ribbons. When Ribbon Checking is On, the printer alerts the operator if a ribbon is not installed, or if the ribbon life has been reached (see Ribbon Life below). Ribbon Check may be turned off if these features are not desired.

Ribbon Check may also be turned off to allow the use of non-Printek brand ribbons. Using non-Printek ribbons may limit the warranty on the print head, so before turning Ribbon Check off, please read “Why Use Only Printek® Brand Ribbons” on page 10 and the warranty information on page

67