Q-See QSDT8PCRC, QSDT8PCDP, QSDT16PCRC user manual User Configuration, Using the E-MAP, User Rights

A gray map icon can be drawn to the corresponding position in the map on the right and set it as a sub-map of the current map, or click the gray map icon on the left by right key and select ‘Open’ to build a new map. You can also click the blue map icon on the left by right key, and select ‘Rename’ to change the name of the map or select ‘Close’ to cancel this map. The map tree can only support three levels of maps and submaps.

USING THE E-MAP

To view the E-map during monitoring, click on its icon on the right side of the Main Display Interface.

When a channel alarm is triggered, the camera icon will flash a yellow alarm signal. Select ‘Auto Show’, in case of an accidental alarm, an alarming screen will pop out automatically and you can know about the alarming position immediately. Right-click on the camera to bring up its feed immediately.

Alternately, you can enable Auto Show to bring up the E-map when you’re in another viewing mode.

7.4 USER CONFIGURATION

User accounts, privileges and passwords can be added, changed or deleted in this menu. After installing the SuperDVR program, it will automatically create an administrator

account with the user name SYSTEM with no password. Users can use this name to log in the system and Add, Edit or Delete users’ parameters.

PICTURE 7-13

USER RIGHTS

Select a user in the User Configuration area, and click Edit to enter the Edit User area

Users can edit user’s password and rights here, but not the user name.

The system offers three kinds of rights:

Administrator: this user has the right to change all the settings and playback. This user also has the right to assign users power user rights and normal user rights.

Power User: This type of user is authorized by the administrator. The administrator assigns rights to power users by checking boxes in the Power User list.

Normal User: Normal user’s rights are also assigned by the administrator. They have the same list of available rights as Power Users. However, whether they can possess a right is be decided by the administrator. Only if the administrator assigns that right, will they have the right. For example, if Basic Configuration is checked, the Normal User can access these functions.

PICTURE 7-14

PICTURE 7-15

CHAPTER 7 SYSTEM SETTINGS

NOTE! Administrators can change and authorize rights to Power Users and Normal Users, but they cannot change or authorize other Administrators’ rights.

46 47