STORAGE DISK
You can choose where to store recorded files by selecting storage disk. By checking the Recycle check box, users can setup the software to continue recording after the hard drive is full by recording over the oldest files on the hard drive.
By clicking Copy To you can copy the setting of this channel to any other selected channel.
PICTURE 9-58
MOTION CONFIGURATION
Click the running figure icon to access the Motion Configuration interface.
Sensitivity - Set motion detection sensitivity here.
Speed - Motion detection speed Block number - Set grid’s number
Select all - Select all the areas of the channel as detection area
Clear all - Clear all the detection areas and then users can select customized detection areas using mouse curser.
PICTURE 9-59
By clicking Copy To you can copy the setting of this channel to any other selected channel.
E-MAIL CONFIGURATION
Click the
Mail setup |
| |
Send to - Receiver’s |
| |
| ||
Subject - |
| |
You can select the ‘Set Mail Internal’ check | PICTURE | |
box to set | ||
| ||
seconds, 10 seconds and so on. |
|
Attachment setup
Select ‘Attachment’ and the system will attach an image from the camera that triggered the alarm to the designated recipient.
Camera - Channel Name |
|
Time - Display Time |
|
Format - Image Format | PICTURE |
Resolution - CIF or QCIF |
|
CHAPTER
Mail server setup
In this area, users can set receiver and sender’s
SMTP server - Sender’s SMTP, such as smtp.yahoo.com
User name - Sender’s User Name
SMTP PORT - Mail server’s port, the default value of mail server is 25.
Password - Sender’s Password
You can select ‘My server requires a secure connections’ or ‘My outgoing server (SMTP)requires authentication’ check box according to server mail service policy of mail service provider.
PICTURE 9-60
PICTURE
9 REMOTE SURVEILLANCE & PLAYBACK
78 | 79 |
