Q-See QSDT16PCRC, QSDT8PCRC, QSDT8PCDP user manual Introduction, Features and Specifications

INTRODUCTION CHAPTER 1

FEATURES AND SPECIFICATIONS

The QSDT8PCRC, QSDT8PCDP and QSDT16PCRP 8- and 16-Channel cards allow you to add surveillance capabilities to your computer. They use a H.264 hardware compression format which provides maximum file storage with the least amount of signal loss possible. Monitor and record up to four channels in CIF resolution with synchronous audio and video compression and transmission. Remotely monitor your system through your network, over the Internet or using select mobile devices.

The first chapters will cover the installation of your card as well as any connections you may wish to make. Later chapters will guide you through the installation of the SuperDVR 6.3 software which supports these cards along with how to operate the hardware and software together.

Please make sure you operate the products strictly in accordance with applicable laws along with following the guidance of this manual to maintain the stability of your digital surveillance system.

This product offers the following features:

Motion detection mode

Motion detection areas are adjustable with a maximum 16 areas for each channel. Users can also set motion detection sensitivity for each channel. The system begins to record only when motion is detected on the channel and after motion stops it will stop recording after a certain time period, which is adjustable by users.

Sensor alarm record mode

The system has an external alarm dongle which enables the system to support alarm input and output.

Recycling record mode

Users can set recording storage sequence for hard drive partitions. The recording storage will automatically switch to the next partition when the current one is full. If all the partitions are full and recycling record mode is enabled, the oldest recorded data will be covered by new data. Users can also set hard drive minimum storage alarm. Then once the present storage space is less than the minimum storage and recycling record mode is not enabled, recording will automatically stop.

P.T.Z control function

Supports many protocols: PelcoD, PelcoP, DSCP, DH-SD, Lilian, Minking, Neon, Star, VIDO, and VISCA. Users can control multiple speed domes and integrative cameras, including pan, tilt, zoom, focus and iris adjustment for P.T.Z devices. Supports preset points and auto scan.

User management

Different users have different rights, user names and passwords, to ensure system security.

Multi-channel display

Supports different multi-channel display modes, full screen display and auto dwell display.

Also:

nOne PC can fit 1, 2 or 4 cards of the same model to control up to 32 channels total

nSupports 320x240, 704x480 (NTSC), 352x288, 704x576 (PAL) standard resolutions.

nImage color is adjustable for each channel, including contrast, brightness, hue and saturation.

nH.264 compression format greatly reduces HDD usage.

nPowerful video playback functions, including pause, stop, fast-forward, single-frame play and image capture.

nSupports advanced search mode. Users can search by date/time, camera, record mode, and random combination of the three methods.

nSupports recorded file backup, delete by date/time, camera.

nConveniently extend system functions through software upgrades.

nSupports multiple languages, including English, German, Spanish, Portuguese, Chinese (Traditional), and other customized languages.

nCPU and storage resource saving by advanced technology

nRemote Surveillance and P.T.Z control through LAN, Intranet, and Internet.

nSupports alarm pre-record.

nSupports buzzer, e-mail alarm out.

nCan greatly decrease fragmented files while using NTFS partition.

nUser-friendly graphical user interface.

8 9