ACCESSING THE INTERNET EXPLORER CLIENT

After enabling network server on the unit, and enabling ActiveX, users can view the video from the cameras over the LAN or Internet through Internet Explorer. This unit only supports Internet Explorer browser, no other browsers are supported. It also supports Win2000, WinXP, Vista, and Win7.

Input the IP address of the computer with the card if accessing from LAN, or the public IP address of the router if accessing from the internet, into the Internet Explorer window to reach the window that prompts you to install the ActiveX control.

You will get a message asking you to install the file NetVideo.cab. Install it as normal.

PICTURE 9-39

You will then be asked to log in. Use the same User Name and Password as you would when logging in from the computer itself. The default User Name is SYSTEM without a password.

Once you have entered the User Name and

Password, click OK to log in.

PICTURE 9-40

As you can see, the WebCam main interface is very similar to the SuperDVR main interface.

PICTURE 9-41

Icon

Description

Controls for PTZ Cameras: Move Up. Move Down.

Move Left rotate left. Move Right. Stop Rotating.

PTZ ‘Focus’ buttons. Far Focus Near Focus

PTZ ‘Zoom’ buttons. Zoom In Zoom Out

PTZ ‘Iris’ button. Increase light. Decrease light

Go to a Preset Point

Set a Preset Point

Speed dome. Adjust PTZ speed.

Single channel with full screen display

Four channel mode - four cameras displayed

Contrast adjustment

Brightness adjustment

Hue adjustment

Saturation adjustment

Log in/ Log out

Record playback

System Configuration

LAN or Master stream is for users on the same network as your system. It has higher frame rate and needs higher network bandwidth

Internet, or sub stream, has a lower frame rate and requires lower network bandwidth. Users can select the stream according to their bandwidth.

CHAPTER 9 REMOTE SURVEILLANCE & PLAYBACK

68

69

Page 35
Image 35
Q-See QSDT16PCRC, QSDT8PCRC, QSDT8PCDP user manual Accessing the Internet Explorer Client, Icon