Ricoh SGC 1506/GS, 106/LD215c appendix Press Com.Test

Specifying a Destination Folder

C

D

Select [Manual Entry], and then press {OK}.

Enter the path to the destination folder, and then press {OK}. 2

The following is an example of a path where the folder name is “user” and the computer name is “desk01”: \\desk01\user

Instead of specifying the destination using its computer name, you can also use its IPv4 address.

E Enter a user name used to log on to the client computer, and then press {OK}.

F Enter the password used to log on to the client computer, and then press {OK}.

The Confirm Destination screen appears.

G Press [Com.Test].

A connection test starts.

55