Ricoh 106/LD215c Preparation for Delivering, Make the necessary settings in System Settings

Models: SGC 1506/GS 106/LD215c

1 144
Download 144 pages 27.23 Kb
Page 80
Image 80

Delivering Scan Files

Preparation for Delivering

This section explains the preparation and settings for delivering scan files.

Important

This function is available only when Function Upgrade Option is installed.

The network delivery scanner requires a delivery server that has software such as the optional ScanRouter delivery software installed. For details about the ScanRouter delivery software, see the manuals supplied with the Scan- Router delivery software.

 

 

3

To view files delivered to an in-tray, you must install DeskTopBinder on the

 

client computer.

A Connect the machine to the network.

Connect the machine to the network using an Ethernet cable or IEEE 1394 ca- ble, or wireless LAN (IEEE 802.11b).

B Make the necessary settings in [System Settings].

If you have connected the machine to the network using an Ethernet cable, make the following settings. For details, see General Settings Guide.

Specify the machine’s IPv4 address and subnet mask.

In [Effective Protocol], enable [IPv4].

Set [Delivery Option] to [On].

C If necessary, change settings in [Send Settings] under [Scanner Features].

D Using the ScanRouter delivery software, register this machine as an I/O de- vice. In addition, register destinations and specify such settings as the de- livery type and sender.

For details, see the ScanRouter delivery software manuals.

Note

To connect the machine to the network using an IEEE 1394 cable or wire- less LAN (IEEE 802.11b), an extended 1394 board or extended wireless LAN board is required respectively. For details, see Network Guide.

Items to set up in [System Settings] vary depending on the network environ- ment. For more information about network settings, see General Settings Guide.

For details about installing DeskTopBinder Lite, see “Installing DeskTop- Binder Lite from Provided CD-ROM”.

Reference

p.73 “Installing DeskTopBinder Lite from Provided CD-ROM”

72

Page 80
Image 80
Ricoh 106/LD215c, SGC 1506/GS appendix Preparation for Delivering, Make the necessary settings in System Settings