Getting Acquainted
4
1
DAttach the ferrite core to the loop.
EAttach the network interface cable to the 10BASE-T/100BASE-TX connector
on the right side of the back cover of the machine.
Reference
See P.1 “Connecting the Machine” to make sure of the position of the
10BASE-T/100BASE-TX port.
Note
Make sure that the cable is connected to the 10BASE-T/100BASE-TX port.
Do not connect the cable into the Fax port.
FConnect the other end of the cable into the network.

Button and indicators on the network interface board

1. Button
Press this button for more than 2 seconds
to print “Network Configuration Page ”.
Press this button more than 5 seconds to
print “System Log Information”.
2. Indicator (orange)
Stays on while the network interface
board is working.
3. Indicator (green)
Stays on while the 100BASE-TX is work-
ing. Stays off while 10BASE-T is working.
4. Indicator (green)
Stays on while the machine is in a net-
work enviroment.
TAHX010E
1
2
3
4