25
2. Copying

Basic Procedure

AWhen the machine is set for user
code, enter the user code with the
{
{{
{
Number
}
}}
} keys and then press the
{
{{
{
#
}
}}
} key.
Reference
See P.49 “User Codes”.
BMake sure that the machine is in
Copy mode.
Note
If not, press the {
Copy
} key.
CMake sure that there are no previ-
ous settings remaining.
Note
To clear settings, press the
{
Clear Modes
} key.
DSet your originals.
Reference
See P.27 “Setting Originals”.
ESet your desired settings.
FEnter the number of copies re-
quired with the {
{{
{
Number
}
}}
} keys.
Note
The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99). See “05. Max. Copy
Q'ty” in P.78 “1. General Fea-
tures 1/4.
To change the number entered,
press the {
Clear/Stop
} key and
enter the new number.
GPress the {
{{
{
Start
}
}}
} key.
The machine starts copying.
Note
To stop the machine during the
multi-copy run, press the {
Clear/
Stop
} key.
To return the machine to the ini-
tial condition after copying,
press the {
Clear Modes
} key.