NetWare 4.x, 5 - Advanced Settings
39
3
ery mode, use the NIB Setup Tool Wizard. P.29 “Quick Setup Using the NIB
Setup Tool Wizard”
ALog in to the file server as an Admin or an Admin equivalent.
BRun the NIB Setup Tool.
Reference
“Running the NIB Setup Tool”
P.28.
CClick [
Property Sheet
] and click [
OK
].
The Browse dialog of the Network Interface Board appears.
DClick [
IPX protocol
].
ESelect the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click [
Next >
].
Note
If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
FConfirm that the MAC and IPX addresses are correct, and click [
Finish
].
[
NIB Setup Tool
] window appears.
GClick [
Configure
].
The property sheet appears.
HClick the [
NetWare
] tab, and make the following settings.
AIn the [
Print Server Name
] box, input the name of the print server.
BIn the [
File Server Name
] box, input the name of the file server in which a
print server is to be created.
Clicking [
Browse
], you can select a file server among those listed in the
Browse dialog.
CIn the [
NDS Context
] box, input the context in which the print server is to
be created.
Clicking [
Browse
], you can select a context among those listed in the
Browse dialog.
Note
Object names must be input from a lower level and divided by a period.
For example, if you want to create a file server into NETWORK under
DS, input “NETWORK. DS”.
DIn the [
Print Server Operation Mode
] group, click [
As Print Server
].
EClick [
OK
] to close the property sheet.
FAfter a confirmation dialog appears, click [
OK
].