Ricoh 180 Polling Transmission Clear Report

Advanced Transmission Features
82
4
BEnter the 4 character Polling ID
with letter keys/ number keys
and the letter (A–F).
Note
❒If you make a mistake, press
the {
Clear/Stop
} key and try
again.
0000 and FFFF is not available.
CPress [S
SS
S
File
] and specify
whether to save the stored orig-
inal.
Each time you press the key, the
text at the middle right corner of
the display toggles between
“Save” and “Use once”.
Note
❒To delete the original imme-
diately after transmission, se-
lect “Use once”. To
repeatedly send the original,
select “Save”.
EPress [
OK
].
The Transmission Mode menu is
shown. A check mark is added to
“Polling TX”.
Note
❒To cancel the Polling Transmis-
sion, press [
Cancel
]. The Trans-
mission Mode menu is shown.
FPress [
Exit
].
The initial display is shown.
Note
❒“Polling TX” is displayed. If
you set up other advanced
transmission function (except
Polling Reception), “Others” is
displayed.
GPress the {
{{
{
Start
}
}}
} key.
Polling Transmission Clear
Report
This report allows you to verify
whether Polling Transmission has
taken place.
Limitation
❒This report is not printed if the
User Parameters are set to allow
the stored originals to be repeated-
ly sent (Save). ⇒ P.184 “Changing
the User Parameters”
Note
❒This report is turned on by default.
You can turn it off if you wish. ⇒
P.184 “Changing the User Parame-
ters”