Ricoh 180 - page 277

NetWare Configuration
42
3
DClick [ IPX protocol
].
ESelect the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click [
Next >
].
Note
❒If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
FConfirm that the MAC and IPX addresses are correct, and click [ Finish
].
[
NIB Setup Tool
] window appears.
GClick [ Configure
].
The property sheet appears.
HClick the [ NetWare
] tab, and make the following settings.
AIn the [
Print Server Name
] box, input the name of the print server.
BIn the [
File Server Name
] box, input the name of the file server in which a
print server is to be created.
Clicking [
Browse
], you can select a file server among those listed in the
Browse dialog.
CIn the [
NDS Context
] box, input the context in which the print server is to
be created.
Clicking [
Browse
], you can select a context among those listed in the
Browse dialog.
Note
❒Object names must be input from a lower level and divided by a period.
For example, if you want to create a file server into NETWORK under
DS, input “NETWORK. DS”.
DIn the [
Print Server Operation Mode
] group, click [
As Remote Printer
].
EIn the [
Remote Printer No.
] box, input the number of the printer.
Important
❒Use the same number as that of the printer to be created in the print
server.
FClick [
OK
] to close the property sheet.
GAfter a confirmation dialog appears, click [
OK
].
IIn the [ NIB
] menu, click [
Exit
] to exit the NIB Setup Tool.