Windows NT 4.0 Configuration
18
2

Preparing to Use the NetBEUI Protocol for Printing

Follow these instructions to configure the Network Interface Board and Win-
dows NT to use the NetBEUI protocol.
Configuring the Printer
Configure your printer to use the NetBEUI protocol.
• Confirm that the NetBEUI protocol is set to be active. (The factory default is
active.)
Reference
For more information on how to make the above settings, refer to the Operat-
ing Instructions for your printer.

Configuring a Windows NT Computer

Install the NetBEUI protocol into a Windows NT computer, and enter the LAN
adapter number (Lana Number).
ADouble-click the [
Network
] icon in the [
Control Panel
], and confirm that “Net-
BEUI Protocol” is in the [
Network protocols
] box of the [
Protocols
] tab.
Note
❒If the NetBEUI protocol is not installed, click [
Add
] in the [
Protocols
] tab,
and install it. For more information, refer to the Windows NT online help.
BChange the Lana Number. Click the [
Services
] tab, select the [
NetBIOS inter-
face
] of the [
Network Services
] box , and click [
Properties
].
CSelect the Lana Number corresponding [
Nbf protocol
] of the [
Network route
]
headline, and click [
Edit
].
DInput “0” as the Lana Number.
Note
❒If the other protocol's Lana Number is configured with “0”, you must
change the Lana Number a number other than “0”.
EClick [
OK
].
FClick [
close
], and close the [
Network
] dialog.
GAfter confirming the message for restart, click [
Yes
].
Note
❒When you change the Lana Number, You must restart.