Preparing for a Network Connection
17
2

Configuring a Windows NT Computer

Follow these steps to configure a Windows NT to use the TCP/IP protocol.
ADouble-click the [
Network
] icon of [
Control Panel
], and confirm that “TCP/IP
Protocol” is in the [
Network protocols
] box of the [
Protocols
] tab.
Note
❒If the TCP/IP protocol is not installed, click [
Add
] in the [
Protocols
] tab, and
install it. For more information, refer to the Windows NT online help.
BConfigure the TCP/IP protocols with the appropriate IP address, subnet
mask and other settings.
Confirm with the network administrator that the settings are correct.
CClick the [
Services
] tab, and confirm that the “Microsoft TCP/IP Printing” is
installed.
If “Microsoft TCP/IP Printing” is not installed, click [
Add
] in the [
Services
]
tab, and install it. For additional help in installing and configuring network
services, refer to the Windows NT online help.