Basic Functions
33
2
When the Toner Saving mode is
specified , the whole image gets
lighter.
When you cannot make clear
copies, you can adjust the quali-
ty level of copies for each of the
original types (Text, TextPhoto,
Photo). See P.63 “If You Can-
not Make Clear Copies".
Selecting Copy Paper
There are two ways to select copy pa-
per:

Auto Paper Select

The machine selects a suitable size
of copy paper automatically based
on the original size and the repro-
duction ratio.
Note
When the original is set at a dif-
ferent direction from the copy
paper in the paper tray with
Auto Tray Switch mode ON, the
machine automatically rotates
the original image by 90° to
match the copy paper direction
(the paper tray unit (option) is
required.). This applies to the
following paper sizes:
Reference
For Auto Tray Switch, see “13.
Auto Tray Switch” in the Sys-
tem Settings.

Manual Paper Select

You can select the desired copy pa-
per size manually. You can also se-
lect the bypass tray.
Reference
See P.39 “Copying from the By-
pass Tray”.
Note
When you use Auto Paper Select,
refer to the following table for pos-
sible copy paper sizes and direc-
tions. (if the ratio is 100%)
Metric version A4 KL, B5 KL
Inch version 81/2" × 11" KL