Ricoh 180 INITIAL SETUP TX

Facsimile User Tools
144
7
INITIAL SETUP TX
When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode (Memory/Immediate
Transmission), scanning conditions
(Resolution, Original Type, Image
Density, and Auto Image Density)
and Auto Reset.
Note
❒You can also choose whether the
machine returns to the home set-
tings after each communication. ⇒
P.184 “Cha nging the User Parame-
ters”
AMake sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒If the standby display is not
shown, press the {
Fax
} key.
BPress the {
{{
{
User Tools/Counter
}
}}
} key.
CEnter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
DEnter the function number for
“Initial Setup TX” using the num-
ber keys.
The “Initial Setup TX” menu is
shown on the display.
EEnter a function number using
the number keys.
Note
❒If you make a mistake, press
Cancel and enter the correct
number.
FSelect the mode you want to
change using the 0
00
0 or 1
11
1 keys
then press [
OK
].