KEY OPERATOR SETTINGS
179
7
CEnter the number of the Fax
mode.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
DEnter the function number for
“Key Op. Settings” using the
number keys and press the {
{{
{
#
}
}}
}
(Enter) key within 3 seconds.
Note
If “Key Op. Settings” is not
shown, press [
Prev.
] or [
Next
].
EEnter the function number for
“ECM” using the number keys.
FSwitch ECM on or off using the 0
00
0
or 1
11
1 key and press [
OK
].
Note
If you press [
Cancel
], the previ-
ous setting is not changed and
the display shown in step 5 ap-
pears again.
GPress [
PrevMenu
].
HPress the {
{{
{
User Tools/Counter
}
}}
} key.

Transfer Report

For the requesting party to be able to
receive Transfer Result Reports from
the Transfer Station, the requesting
party must store the number of the
telephone line their machine is con-
nected to in their own machine.
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 212 123
4567, store the following:
• 212-1234567
AMake sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {
Fax
} key.
BPress the {
{{
{
User Tools/Counter
}
}}
} key.