NetWare Configuration
36
3
JInput “PCONSOLE” from the command prompt.
F:> PCONSOLE
KCreate a print queue as follows.
Note
If you use a currently defined print queue, proceed to the step L.
AIn the [
Available Options
] menu, select [
Print Queue Information
].
BPress {
Insert
} and input a print queue name.
CPress {
Esc
} to return to the [
Available Options
] menu.
LCreate a printer as follows.
AIn the [
Available Options
] menu, select [
Print Server Information
].
BTo create a new print server, press {
Insert
} and input a print server name.
If you use an currently defined print server, select one of the print servers
shown in the [
Print Server
] list.
Important
Use the same name as that specified in the NIB Setup Tool. (Step H-A).
CIn the [
Print Server Information
] menu, select [
Print Server Configuration
].
DIn the [
Print Server Configuration menu
], select [
Printer Configuration
].
ESelect the printer which is indicated as “Not Installed”.
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step H-D).
FIf you change the name of the printer, input a new name.
A name "Printer x" is assigned to the printer. x stands for the number of the
selected printer.
GAs Type, select [
Remote Parallel, LPT1
].
The IRQ, Buffer size, Starting form, and Queue service mode are automat-
ically configured.
HPress {
Esc
}, and click [
Yes
] in the confirmation dialog.
IPress {
Esc
} to return to the [
Print Server Configuration Menu
].