NetWare 3.x - Advanced Settings
35
3

Setting Up as Remote Printer

ALog in to the file server as a Supervisor or a Supervisor equivalent.
BRun the NIB Setup Tool.
Reference
“Running the NIB Setup Tool”
⇒
P.28.
CClick [
Property Sheet
] and click [
OK
].
The Browse dialog of the Network Interface Board appears.
DClick [
IPX protocol
].
ESelect the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click [
Next >
].
Note
❒If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
FConfirm that the MAC and IPX addresses are correct, and click [
Finish
].
[
NIB Setup Tool
] window appears.
GClick [
Configure
].
The property sheet appears.
HClick the [
NetWare
] tab, and make the following settings.
AIn the [
Print Server Name
] box, input the name of the print server.
BIn the [
File Server Name
] box, input the name of the file server in which a
print server is to be created.
Clicking [
Browse
], you can select a file server among those listed in the
Browse dialog.
CIn the [
Print Server Operation Mode
] group, click [
As Remote Printer
].
DIn the [
Remote Printer No.
] box, input the printer number.
Important
❒Use the same printer number as that to be created in the printer server.
EClick [
OK
] to close the property sheet.
FAfter a confirmation dialog appears, click [
OK
].
IIn the [
NIB
] menu, click [
Exit
] to exit the NIB Setup Tool.