Ricoh 180 F, G, I, H

Windows 95/98 Configuration
12
1
FSelect the printer you want to use by clicking it, and click [ Next >
].
Reference
If you want to know more about a particular item in the dialog, refer to
P.53 “Multi Direct Print”.
Note
❒You can identify the “Printer Name” and “Address” on the “configuration
page” printed by the printer.
GConfirm that the Port name of the printer is correct, and click [ Next >
].
If you did not select a printer with procedure F, you must enter the Port name.
Inputting the Port name for use with the TCP/IP protocol
AInput the IP address of the Network Interface Board into the [ IP address
]
box.
You can input the host name or a domain name instead of an IP address
into the [
Host Name
] box.
Limitation
❒You cannot use a host name that begins with “%%”.
Note
❒When you use DHCP to assign IP addresses to Network Interface
Boards, you can use a printer name (Current Hostname on the network
configuration page) as the host name.
Inputting the port name for use with the NetBEUI protocol
APrint a configuration page, and confirm the Network path name.
Reference
For information on printing a configuration page, refer to the Operating
Instructions for your printer.
BInput the printer's Network path name in form of “%%Computer name
\Share name”. Do not input “\\” as head characters but “%%”.
HConfirm the port name in the [ Port Name
] box, and click [
Finish
].
IConfirm that the port name is displayed in the [ Print to the following port
] box,
and click [
OK
].
Configuration is complete.
When you print, the printing procedure is no different. When you select the
printer configured here, the computer automatically uses Multi Direct Print.