REGISTER/DELETE MENU
131
7

Deleting Speed Dials

Use this procedure to delete any
Speed Dials you are not using any-
more.
Limitation
If a registered Speed Dial is being
used for a standby Memory Trans-
mission, the message “This des-
tination is in use for
standby transmission file.
Please modify/delete after
transmission.” is shown and
you cannot change the destination
for this Speed Dial.
AMake sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {
Fax
} key.
BPress the {
{{
{
User Tools/Counter
}
}}
} key.
CEnter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
DEnter the function number for
“Register/Delete” using the num-
ber keys.
EEnter the function number for
“Delete Speed Dial” using the
number keys.
FEnter the Speed Dial code you
wish to delete.
The registered destination is
shown on the display.
Note
If you make a mistake before en-
tering the first digit, press the
{
Clear/Stop
} key and enter the
correct number. If you make a
mistake after entering the last
digit, press [
No
] and enter the
number again.
You can press [
Status
] to see
which Speed Dials are currently
programmed.
GPress [
Yes
].