NetWare 3.x - Advanced Settings
33
3
ESelect the IPX address of the Network Interface Board which is to be con-
figured by clicking it, and click [
Next >
].
Note
If you don't know which Network Interface Board you are configuring,
print the Configuration Page using the printer's operation panel, and select
the MAC address that is on the page.
FConfirm that the MAC and IPX addresses are correct, and click [
Finish
].
The [
NIB Setup Tool
] window appears.
GClick [
Configure
].
The property sheet appears.
HClick the [
NetWare
] tab, and make the following settings.
AIn the [
Print Server Name
] box, input the name of the print server.
BIn the [
File Server Name
] box, input the name of the file server in which a
print server is to be created.
Click [
Browse
] to select a file server among those listed in the Browse dia-
log.
CIn the [
Print Server Operation Mode
] group, click [
As Print Server
].
DClick [
OK
] to close the property sheet.
EAfter a confirmation dialog appears, click [
OK
].
IIn the [
NIB
] menu, click [
Exit
] to exit the NIB Setup Tool.
JInput “PCONSOLE” from the command prompt.
F:> PCONSOLE
KCreate a print queue as follows.
Note
If you use a currently defined print queue, proceed to the step L.
AIn the [
Available Options
] menu, select [
Print Queue Information
].
BPress {
Insert
} and input a print queue name.
CPress {
Esc
} to return to the [
Available Options
] menu.