POLLING RECEPTION
85
4
BEnter the “Polling RX” function
number with the number keys.
Note
If the appropriate display is not
shown, press [
Prev.
] or [
Next
].
CDepending which method you
are using, choose one of the fol-
lowing procedures:

Default ID Polling Reception

APress the 0
00
0 or 1
11
1 key to select
the Default ID and press [
OK
].

ID Override Polling Reception

APress the 0
00
0 or 1
11
1 key to select
the Override ID and press [
OK
].
BEnter a polling ID (4 charac-
ters) with the number keys and
the letter (A–F).
Note
If you make a mistake, press
the {
Clear/Stop
} key and try
again.
0000 and FFFF is not avail-
able.
DPress [
OK
].
The Transmission Mode menu is
shown. A check mark is added to
Polling Reception.
Note
To cancel Polling Reception,
press [
Cancel
]. The Transmis-
sion Mode menu is shown.
EPress [
Exit
].
The following display is shown.
Note
“Polling RX” is displayed.
FDial and press the {
{{
{
Start
}
}}
} key.

Polling Reserve Report

This report is printed after Polling Re-
ception has been set up.
Note
By default this report is turned off.
Turn it on with the User Parame-
ters. P.184 “Changing the User
Parameters”

Polling Result Report

This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.