Getting Started
16
1
When you set an original on the exposure glass, it is detected as the follow-
ing table. If you select Irregular Scan Area, lengths up to 17” are possible.
-
--

-Maximum Scan Area

Memory Transmission/Immediate Transmission
From the Document Feeder (ADF): 11" × 47" / 297 × 1,200mm (W × L)
From the exposure glass:11" × 17" / 297 × 432mm (W × L)
Note
The maximum scan area for Immdediate Transmission depends on the reso-
lution and installed optional Expansion Memory.

If the Machine Cannot Detect the Size of Your Original

If the machine cannot detect the original size, the following display is shown:
If this happens, carry out the following steps.
ARemove the original and replace it on the exposure glass. Press the {
{{
{
Start
}
}}
}
key to scan the original again. If the machine still cannot detect the original
size, the following display is shown:
BPress the 0
00
0 and 1
11
1 keys to switch the scan size and press the {
{{
{
Start
}
}}
} key
again.
Length
width "12.50 "12.50 "13.50 "13.50
"9.60 LTL"8.5 × "13 "8.5 × "14L
"9.60 "10.60 "8 × "10Knot detected "10 × "14L
"10.60 LTKnot detected DLTL