Manual Dial

Manual Dial

Pick up the handset of the external telephone and dial. When the line is connected and

you hear a high-pitched tone, press the {Start}key to send your fax document. If, on 1 the other hand, you hear a voice at the other end, continue conversation as normal.

Important

❒The external telephone is required.

❒Thisfunctionis notavailable for theoptional extraG3interfaceunit,InternetFaxandIP-Fax.

A B

Place the original, and then select the scan settings you require.

Pick up the handset.

You will hear a dial tone.

C Dial.

The machine immediately dials the destination.

If you make a mistake, replace the handset, and then try again from step B.

To select a destination from the Address Book, see “Using the Address Book to Specify Destinations”.

D When the line is connected and you hear a high-pitched tone, press the {Start}key to send your fax document.

If you hear a voice, tell the receiver that you want to send them a fax document (ask them to switch to facsimile mode).

The transmission starts.

E Replace the handset.

Ifyouwanttocancelatransmission,pressthe{Clear/Stop}key,andthenremovetheoriginals.

After transmission, the standby display appears.

Note

❒When the operation switch is off, even if the main power switch is on, you cannot operate this machine using only the handset of the external tele- phone. You must first press the operation switch to turn on the machine.

Reference

p.66 “Using the Address Book to Specify Destinations”

89