4.Changing/Confirming Communication Information

This section explains the features of [Information] and [Change / Stop TX File], which you can use to confirm communication results on the screen or printed reports.

Changing the Settings of Files in Memory

After you have pressed the {Start}key (after scanning originals), you can check and edit the destination or settings of Memory Transmission. You can also cancel a transmission, change the settings of a transmission, print a stored file, print a list of stored files, and resend a file which the machine failed to transmit.

Note

If there are no files being sent, or stored by Memory Transmission, [Change / Stop TX File] does not appear on the display.

You cannot check or edit a file being sent. Also a Confidential Transmission file or stored file to be printed as a report cannot be checked or edited.

There are cases when a destination may not be selected as the destination ap- pears as “p”, depending on the security settings.

185