Internet Fax Functions

T.37 Full Mode

 

 

This machine is T.37 full mode compatible. T.37 full mode is an international

 

standard for Internet Fax transmission. (ITU-T Recommendation, RFC2532)

 

1

When an Internet Fax communication is made between T.37 full mode compat-

 

ible machines, the receiver side sends the return receipt (dispatched) in response

 

to the reception notice request attached to the sent e-mail. This return receipt in-

 

cludes the receiver's reception capability information (compression type, paper

 

size, and resolution). When the receiver is programmed in the Address Book as

 

the full mode destination, the sender side automatically registers the received in-

 

formation in the Address Book. This allows you to send a subsequent Internet

 

Fax document to that receiver based on this information.

 

❖Returning a Return Receipt

When e-mail is received, if the sender requests reception notice, the receiver sends a return receipt that includes the receiving machine's capability (com- pression type, paper size, and resolution).

❖Registering the Received Reception Confirmation Contents

When the sender receives the return receipt that includes the receiver's recep- tion capability, the sender checks that the final recipient address sent is pro- grammed in the Address Book. If it is programmed as a full mode destination, the sender automatically registers the receiver's reception capability. The reg- istered reception capability is updated each time the sender receives new re- ception capability information. The sender can send documents to the receiver based on this information.

If the receiver is programmed as the simple mode machine or not pro- grammed in the Address Book, the receiver's reception capability cannot be registered.

If you know the receiver's reception capability, you can set it manually.

❖Requesting a Reception Notice

When the receiver's machine supports T.37 full mode and is programmed as a full mode machine in the Address Book, the machine requests the reception notice from the receiver. Then, the machine will receive the return receipt (sent) that includes the receiver's reception capability.

Note

❒Use Web Image Monitor to manually program a receiver's reception capabil- ity information.

❒If you use Internet Fax transmission, you can send documents to multiple destinations at once. However, if you specify full mode destinations, since each destination may have a different reception capability, transmission is done one by one in the specified transmission order.

Reference

p.136 “Requesting a reception notice”

p.273 “Programming Destination Information from Web Browser”

31