Ricoh 3045 [OK], [OK], [Clear], Important, Clear/Stop, G Press [Exit], [Adv. Features], [Adv. Features], [Password (PWD)], C Press [SEP Code], D Press [RX SEP Code]

Transmission

Setting SEP Codes for Reception

Normally you can only use Polling Reception to receive faxes from machines that have the Polling Reception function and the same manufacturer. However,

1 if a machine of another manufacturer supports Polling Reception, you can receive fax documents from the other party using this method instead.

You can receive documents that have the same SEP Code as the SEP Code you entered. For details about the SEP Code, see “Box Settings” in “Facsimile Fea- tures”, General Settings Guide.

Important

❒A SEP Code cannot be used with Internet Fax.

A Enter the fax number of a destination or an IP-Fax destination. B Press [Adv. Features].

C Press [SEP Code].D Press [RX SEP Code].E Enter a SEP Code, and then press [OK].

“SEP Code” appears one line above [Adv. Features] on the display.

If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing [OK], and then try again.

F When a password is required, press [Password (PWD)], enter the password using the number keys, and then press [OK].

G Press [Exit].

92