Ricoh 3045 [Off], Start, [Cancel], [Sub TX Mode], Fax Header Print, C Select [Options], E Press [OK] twice, D Press [On] for Fax Header Print

Sub Transmission Mode

Fax Header Print

When the Fax Header is set to “On”, the stored name is printed on the receiver's paper.

In some cases, you may want the other party to receive an unmarked copy of your original. To do this, switch Fax Header off.

You can store two Fax Headers; “First Name” and “Second Name”.

For example, if you store your department name in one and your organization 2 name in the other, you could use the first when sending internal faxes and the second for external faxes.

A Place the original, and then select the scan settings you require. B Press [Sub TX Mode].

C Select [Options].D Press [On] for Fax Header Print.

Press [Off] if you do not want to print the sender name.

To cancel the option settings, press [Cancel].

E Press [OK] twice.

F Specify the destination, and then press the {Start}key.

145