Ricoh 3045 [OK], Start, [Cancel], Important, E Press [OK], [Sub TX Mode], [Std. Message], C Press [Std. Message]

Sub Transmission Mode

Standard Message Stamp

Use this function to stamp a standard message at the top of the first original sent.

There are four types of standard messages: “Confidential”, “Urgent”, “Please phone”, and “Copy to corres. section”

You can also program other messages.

Important

❒While this function is in use, the third line of the Label Insertion is not printed.

❒When there is an image around the area where the standard message is to be stamped, that image is deleted.

❒Program a standard message in “Program / Change / Delete Standard Mes- sage” in the Facsimile Features menu. See “Facsimile Features”, General Set- tings Guide.

A Place the originals, and then select the scan settings you require. B Press [Sub TX Mode].

C Press [Std. Message].D Select the standard message to be stamped, and then press [OK].

Programmed standard messages are shown in the keys.

The selected standard message is shown above the highlighted [Std. Message]. To cancel the selection, press [Cancel]. The display returns to that of step C.

E Press [OK].

F Specify the destination, and then press the {Start}key.

The machine cannot stamp multiple standard messages.

2

139