Advanced Features

G When a password is required, press [Password (SID)], enter the password with the number keys, and then press [OK].

H Press [Exit].

1

I Press the {Start}key.

If you use Immediate Transmission and the fax machine at the destination does not support the SUB Code function, a message will appear on the display to inform you of this. When this happens, press [Exit] to cancel the transmission.

Note

❒You can enter numbers, p, q, and spaces.

❒Make sure the number of digits in the SUB Code matches the specification of the machine to which you are sending. For the maximum number of dig- its for the SUB Code of this machine, see “Maximum Values”.

❒You can store SUB Codes as well as names and fax numbers in the destina- tion list and Keystroke Programs.

❒The SUB Code is printed on lists and reports. This is possible only if the SUB Code is specified in [Adv. Features] using the number keys.

Reference

p.277 “Registering and Changing Keystroke Programs”

p.287 “Maximum Values”

“Facsimile Features”, General Settings Guide

“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide

Setting a password

There are times when you may want to use an “SID” (Sender ID) when sending confidential faxes with the SUB Code function. When you use a Transfer Box that has a password, enter the SID Code as the password.

Note

❒For the maximum number of digits for the SID Code, see “Maximum Values”.

❒You can enter numbers, p, q, and spaces.

❒You can store SID Codes as well as names and fax numbers in the destination list and Keystroke Programs.

❒The SID Code is printed on lists and reports. This is possible only if the SID Code is specified in [Adv. Features] using the number keys.

Reference

p.277 “Registering and Changing Keystroke Programs”

p.287 “Maximum Values”

“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide

91