Ricoh 3045 [OK], [OK], [Add], [Protocol], [ProgDest], [Backspace], [Delete All], [Edit Dest.], E Specify the next destination, D To add a destination, press [Add]

1

58

Transmission

C Enter the IP-Fax destination, and then press [OK].

If you have set both of “Enable H.323” and “Enable SIP” parameters to “On” with “IP-Fax Settings” under “Facsimile Features”, [Protocol] appears. Press this button to select a protocol to be used.

If you enter an incorrect character, press [Backspace] or [Delete All]. Then, reenter the characters correctly.

To change the IP-Fax destination after pressing [OK], press [Edit Dest.], re-enter an IP-Fax destination, and then press [OK].

The destination is specified.

Press [ProgDest] in order to store the entered IP-Fax destination in the Address Book.

If you do not want to add a destination, proceed to step F.

D To add a destination, press [Add].

It is not necessary to press [Add] when adding destinations using the destination list.

E Specify the next destination.

Pressing switches the destination list between fax number, e-mail ad- dress, and IP-Fax destination.

To add another destination, repeat steps D and E.